Stanley Proto Industrial Tools

You are here: Solutions >> Conversion Charts

METRIC WRENCH SIZING CHART

Nominal Opening of Proto Wrenches or Sockets in Millimeters to Fit Standard Bolt Heads and Screw Heads

Locate thread diameter of bolt or screw in left column. Then move across to box which has proper identification of bolt or screw at top of vertical column. The size in this particular box is the nominal opening size in inches of the PROTO wrench and sockets that will fit.

WRENCH OR SOCKET SIZE ACROSS FLATS	HEX BOLTS	HEAVY HEX BOLTS	HEAVY HEX STRUCTURAL BOLTS
	Use wrench or socket size shown below?
3.20	—	—	—
4.00	—	—	—
5.00	—	—	—
5.50	—	—	—
6.00	—	—	—
7.00	—	—	—
8.00	M5 x 0.8	—	—
10.00	M6 x 1	—	—
13.00	M8 x 1.25	—	—
15.00	M10 x 1.5	—	—
16.00	M10 x 1.5	—	—
18.00	M12 x 1.75	—	—
21.00	M14 x 2	M12 x 1.75	—
24.00	M16 x 2	M14 x 2	—
27.00	—	M16 x 2	M16 x 2
30.00	M20 x 2.5	—	—
34.00	—	M20 x 2.5	M20 x 2.5
36.00	M24 x 3	—	M22 x 2.5
41.00	—	M24 x 3	M24 x 3
46.00	M30 x 3.5	—	M27 x 3
50.00	—	M30 x 3.5	M30 x 3.5
55.00	M36 x 4	—	—
60.00	—	M36 x 4	M36 x 4
65.00	M42 x 4.5	—	—
70.00	—	—	—
75.00	M48 x 5	—	—
80.00	—	—	—
85.00	M56 x 5.5	—	—
90.00	—	—	—
95.00	M64 x 6	—	—
100.00	—	—	—
105.00	M72 x 6	—	—
110.00	—	—	—
115.00	M80 x 6	—	—
120.00	—	—	—
130.00	M90 x 6	—	—
135.00	—	—	—
145.00	M100 x 6	—	—
150.00	—	—	—

contact | privacy policy | legal | sitemap